BNSWF - PRO-SEAL 870, B-2 BASE
- MSDS: BNSWF
- Manufacturer: PRODUCTS RESEARCH AND CHEMICAL CORP
- Product Name: PRO-SEAL 870, B-2 BASE
- National Stock Number: 8030-00-009-5023
Product Identification
Product ID:PRO-SEAL 870, B-2 BASE
MSDS Date:02/11/1991
FSC:8030
NIIN:00-009-5023
Kit Part:Y
MSDS Number: BNSWF
Responsible Party
GLENDALE, CA 91209
US
Emergency Phone: 800-424-9300(CHEMTREC)/800-228-5635
Info Phone: 818-240-2060
Preparer: AFS
Cage: DO563
Contractor
Telephone: 818-240-2060
Cage: DO563
Ingredients
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 5 - 10%
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
PHENOL POLYMER W/FORMALDEHYDE (PHENOLIC RESIN)
CAS: 9039-25-2
Fraction By Weight: <5%
2-BUTANONE (METHYL ETHYL KETONE)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: <5%
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300 STEL
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
TITANIUM DIOXIDE (FULLY ENCAPSULATED IN THIS PRODUCT AND
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 5%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
CALCIUM CARBONATE (FULLY ENCAPSULATED IN THIS PRODUCT AND
CAS: 1317-65-3
RTECS: EV9580000
Fraction By Weight: 10%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
POLYSULFIDE POLYMER (NON-HAZARDOUS)
CAS: 68611-50-7
HYDROPHOBIC SILICA (NON-HAZARDOUS)
CAS: 67762-90-7
89 G/L (COMBINED)
RTECS: 9999999VO
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Effects of Overexposure:EYES: MAY CAUSE BURNING, TEARING AND REDDENING.
SKIN: PROLONGED EXPOSURE MAY CAUSE DRYING AND CRACKING OF SKIN.
POSSIBLE DERMATITIS. INHALATION: MAY CAUSE DIZZINESS, DROWSINESS
AND FATIGUE. INGESTION: MAY CAUSE DROWSINESS, DIZZINESS AND
NAUSEA.
First Aid
First Aid:EYES: FLUSH WITH LUKE WARM WATER FOR 15 MINUTES. IF SYMPTOMS
PERSIST, CONSULT PHYSICIAN. SKIN: WASH WITH SOAP AND WATER. IF
SYMPTOMS PERSIST, CONSULT A PHYSICIAN. INHALATION: REMOVE TO FRESH
AIR. IF S YMPTOMS ARE PRESENT CONSULT A PHYSICIAN.
Fire Fighting
Flash Point Method:SCC
Flash Point:145F,63C
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER.
Fire Fighting Procedures:USE AIR SUPPLIED RESPIRATOR.
Unusual Fire/Explosion Hazard:HIGH TEMPERATURES MAY CAUSE PRESSURE
BUILDUP IN CLOSED CONTAINERS
Accidental Release
Spill Release Procedures:REMOVE ALL IGNITION SOURCES. SCOOP INTO
CONTAINERS. CLEAN-UP RESIDUE WITH 1,1,1-TRICHLOROETHANE.
Exposure Controls
Respiratory Protection:IF CURED PRODUCT IS SANDED OR GROUND SO AS TO
RELEASE RESPIRSBLE PARTICLES, SUITABLE RESP PROTECTION SHOULD BE
USED.
Ventilation:GENERAL VENTILATION TO MAINTAIN VAPOR BELOW TLV.
Protective Gloves:SOLVENT RESISTANT GLOVES
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health
Chemical Properties
HCC:V4
Spec Gravity:1.44
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BEIGE THIXOTROPIC PASTE
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Hazardous Decomposition Products:OXIDES OF CARBON, SO2, TRACES OF H2S
Disposal
Waste Disposal Methods:EPA HAZARDOUS WASTE D-035. CONSULT STATE
REGULATIONS PRIOR TO DISPOSAL OF SPILLAGE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.